Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

A pilot order of foam bath letter and number sets for an online letter and number learning range: how should buyers evaluate missing or duplicate characters?

Back to list Release Date: 11/20/2026

A pilot order is the cheapest way to find out whether a foam bath letter and number set will actually sell. But when the carton arrives and you lay the pieces out on a table, two problems show up fast: one or two characters never made it into the bag, and somewhere else there are two copies of the same character. On a 36-piece set that is not a cosmetic issue. A missing "E" kills half the simple word-building your listing promises, and a spare "Q" looks like sloppy packing in every product photo you post.

Here is how buyers running an online letter-and-number learning range should evaluate that finding — and what to ask the China EVA foam products factory before the pilot becomes a container order.

First, separate real defects from design choices

Before you raise anything with the supplier, confirm what the letter and number set was supposed to contain. Some piece counts look wrong until you read the packing specification:

  • A standard bath alphabet set is 36 pieces: 26 uppercase letters A–Z plus ten numbers, 0–9. Nothing else should be in the bag.
  • An EVA alphabet set with extras can run to 56 pieces — letters, numbers, marine animals and vehicles — so a buyer expecting only A–Z may think pieces are "wrong".
  • A 66-piece bath toy set is listed as 30 sea animals plus 26 letters plus 10 numbers, and the site states there are no duplicates in it.
  • Sets with random colour assortment will differ from box to box. Random colours are not a defect; a missing character is.

So the first question is never "did you make a mistake?" It is "what does your packing list say per bag?" If the specification and the physical contents disagree, that is a finding worth documenting.

Count it properly before you complain about it

Most disputes in this category go nowhere because nobody counted carefully. Three steps are enough:

  • Lay out a full A–Z grid. Line the pieces up in alphabetical order on a flat surface, numbers below them. Twenty-six slots plus ten. Anything missing or doubled is obvious in seconds.
  • Photograph the layout. One straight-on photo of the arranged set, one close-up of any suspect piece. A pile of loose foam proves nothing; an ordered grid with a gap in it does.
  • Count more than one unit. Open at least five bags from different cartons. One bad bag is a packing error. The same letter missing across several bags points to the die, the cutting plate or the pick list.
Record it as a quantity discrepancy, not just a "quality issue". A missing piece is a counting and packing problem, and that changes which corrective action a factory will actually take.

Match the symptom to the likely cause

The pattern of the error tells you where in production it most likely came from. Use this as a starting point for the conversation, not as a verdict:

What you foundWhere to look firstWhat to ask the supplier
The same letter missing in several bags from different cartonsCutting die or stamping tool, and the pick list used at packingShow me the cutting layout for this SKU and how packers verify each character
One bag short, everything else correctManual counting at baggingIs every bag weighed or checked against a checklist before sealing?
A duplicated letter alongside a missing oneThe two errors usually share one root cause: counting by hand under time pressureWhat stops a double pick and a skip in the same pass?
Pieces present but colours differ between bagsAssortment design, not a defect — unless you specified fixed coloursConfirm on the purchase order whether colours are random or fixed per SKU
Letters cut cleanly but edges rough or burrs visibleCutting tooling and finishingAsk for the pre-shipment inspection record for this lot

What a dependable factory should be able to show you

This is where a pilot order earns its keep. You are not only testing the product, you are testing the supplier's control system. At Fulikai's Custom Capabilities page, the Shenzhen factory describes lines for foaming, cutting, stamping and laser processing across more than 3,000 square metres, and states that products pass through 16 types of tests during production — including colour fastness, tensile strength, ink environmental testing and children's-product safety testing. It also states that full manual inspection is carried out before shipment and that 100% third-party inspection is supported.

Ask for the paperwork behind those claims for your own lot:

  • The packing list per carton, with the character breakdown, not just "36 pcs/bag".
  • Any in-process check record covering counting at bagging.
  • Your right to run a third-party count before goods leave the factory, or to send someone for a factory audit and inspection.
  • The test reports that apply to your market. The site lists CE, EN-71, FDA, FCC, RoHS, SGS and REACH coverage, but a bath toy sold to a US retailer has its own requirements — confirm the report for the specific product, destination and order before you put any compliance claim on a listing.

Fix it in writing before the bulk run

Do not treat the pilot as "close enough". Get the corrections agreed now, while the volume is small:

Agreement pointWhy it matters
Character breakdown written into the purchase order and on the packing listGives you an objective count to check against at receiving
A defined tolerance for short or duplicated pieces per shipmentRemoves arguments about what counts as acceptable
Named remedy: replace the missing characters, re-count the short bags, or credit the shortfall — decided before dispatchDecides who pays for the fix and how fast it happens
A pre-shipment photo of an assembled set per production batchCatches a die or pick-list error before sea freight buries it
Payment terms tied to inspectionSeveral product pages on the site describe a 30% advance with the balance paid after pre-shipment inspection is passed — keep that structure for your order

If you also want your own colours, artwork or packaging, raise it in the same round. According to the factory's materials, colours are formed during one-step foaming with added colour masterbatch, and printing is done by heat transfer, so a change to the colour spec touches the material batch rather than just the surface. Agreeing on assortment and print at the same time you fix the counting issue avoids two separate delays.

Then scale carefully

Once the second sample round counts clean, move to volume in a way that keeps your listings safe. Keep one SKU's character set identical across every replenishment — retail buyers and parents notice when a repeat order is short. If you plan a wider learning range, consider adjacent SKUs from the same EVA educational toys family that share the same counting logic: foam number puzzles, alphabet and number interlocking mats, and themed bath playsets. Same inspection routine, more listings.

A pilot order with a missing letter is not a failed supplier relationship. It is the least expensive information you will ever buy about how this factory counts. The question is whether you use it to fix the process before the container — or discover the same gap at peak season, when a replacement shipment costs you the quarter.

Shenzhen Fulikai Packaging Products Co., Ltd. — custom EVA foam manufacturing for wholesale and OEM/ODM buyers. Order hotline +86 13827489472 · Contact Us

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog