An online stand-up paddleboard seller who launches several colourways at once is asking a distributor to carry more than one SKU. That multiplies the number of listings, photos and review threads that can fail for the same reason — a deck pad that looks nothing like the picture, or that lifts after a season in the sun. Before you repack, work through five checks: the artwork hand-off for each colourway, the foam grade behind the surface texture, the adhesive system, how the kit is packed and labelled, and what the factory can show you about inspection.
Colourways on a deck pad are not just a swatch choice. The groove pattern, the kick shape and any printed logo all sit on the same tooling, so each additional colour needs its own print plate and its own approval. Fulikai works from customer drawings or samples and produces shapes by stamping and custom EVA foam cutting and stamping, and the service team reviews submitted artwork and suggests adjustments — line weight and similar details included — before production starts. Ask your supplier which files they need per colourway (vector artwork, PMS or RAL reference, groove depth drawing) and confirm that every colour you intend to list has its own signed-off plate.
Print method decides how close the shelf image will be to the board on the water. Heat-transfer printing with a white base is what keeps a pale colourway from taking on the grey of the underlying foam; heat transfer printing on EVA foam at Fulikai is described as reaching over 95% colour fidelity, with multi-pass white-base printing used to lift saturation. Colour itself is formed during foaming with added masterbatch rather than painted afterwards, which is the difference between a hue that stays flat across a batch and one that shifts from carton to carton.
Two pads can photograph identically and feel completely different underfoot. Ask for the material call-out in writing: closed-cell EVA, A-grade or regranulated, and the density band. The paddle board traction pad Fulikai shows is a 12-piece set in A-grade closed-cell EVA with 3 mm deep diamond grooves and a tail kicker — that groove depth is what gives grip when the deck is wet, and shallow grooves are the usual cause of negative reviews on budget pads. The SUP traction pad listing specifies high-density EVA with a thickened raised tail kick; the 3-piece surfboard EVA traction pad adds drainage holes to shed water instead of letting it pool on the surface.
For an online seller, those details are listing copy as much as specification. Get them from the factory sheet and put them on the product page, so the buyer who is comparing three colourways is comparing grip and comfort rather than only colour.
Adhesive failure is the complaint that ends a listing's rating. The pads above use marine-grade 3M self-adhesive backing, and the factory notes a specific production detail: EVA dust generated during cutting is what normally weakens bonding, so the surface has to be handled before the tape goes down. Ask your supplier how the foam face is cleaned before the adhesive is applied, and whether the release liner covers the full footprint of every piece.
Then ask what the backing does after removal. The 3-piece surf pad is described as peeling off cleanly without leaving sticky residue or damaging the board finish — useful information if your customer base includes rental fleets and demo boards that get re-padded. If you are stocking adjacent categories, note that the same marine EVA family covers EVA boat decking in faux teak with pre-machined groove lines, sold in roll-sheet format and cut to shape, plus dog traction pads for paddle boards. Those SKUs share the adhesive question, so one answer covers several listings.
A 12-piece pad is a different packing problem from a 3-piece tail pad. A segmented set needs its pieces spaced so they do not curl against each other in transit, plus the tail kicker and any alignment card, all in a carton that survives being stacked in a fulfilment centre for months. The SUP traction pad Fulikai lists ships one piece set per OPP bag, which is workable for single-piece kits but tells you to ask separately how multi-piece sets are held flat.
Repacking for an online seller usually means your own barcode, your own insert card and colour-coded outer labels so the pickers do not mix a teal set into a coral SKU. Agree on label placement and carton marking with the factory before the first container, because re-labelling in your own warehouse is where the cost of a multi-colourway programme quietly grows. If you plan private-label packaging, custom EVA foam manufacturing at Fulikai runs through consultation, proposal and quotation, design drafts and renderings, mould opening and print moulding, signature confirmation and a 30% deposit on the contract — build your packing spec into that sequence rather than adding it after the plates are made.
A new colour is a new chance for a defect: a different masterbatch lot, a different plate, a different print run. Ask whether the incoming checks are per batch or per order. Fulikai states that products pass 16 types of test during production — colour fastness and tensile strength among them — with full manual inspection before shipment and support for 100% third-party inspection; EVA foam factory audits and inspections are documented, and the factory holds audit reports from Coca-Cola, Walmart and Sedex. The site also states an average defective rejection rate above 10%, which is a useful number to hold your supplier to: it means their own line is rejecting parts, and you want to know what reaches the carton.
Certificate scope matters more than the certificate list. Fulikai's pages cite ISO 9001:2015 alongside CE, EN-71, FDA, FCC, RoHS, SGS and REACH, but a report is always written for a specific material, product and destination market. Ask for the report that matches the pad you are buying and the country you are selling into, and keep a copy per colourway file.
Colour count is limited by plate-making, not by moulding. Fulikai quotes 5–7 days for plate-making and says bulk orders can be delivered within 15 days; the same capability page separately promotes a five-day turnaround for plates, so confirm which applies to your order before you promise a launch date to the seller. The SUP traction pad product page gives its own figures — samples in 5–7 working days and a lead time of 25–30 working days after sample confirmation, subject to order conditions. Those two sets of numbers are not interchangeable: one is plate-making, the other is production after sign-off. Put both dates on your launch calendar.
Payment terms follow the same published pattern: a 30% advance, with the balance released after pre-shipment inspection passes. That sequencing protects you on a multi-colourway order, because it gives you one documented gate between "produced" and "paid in full".
A distributor who runs these five checks can carry several colourways without inheriting the same review risk on every listing. Fulikai is a Shenzhen EVA foam products manufacturer working OEM and ODM orders across traction pads, boat decking and the wider water-sports range; send your board drawings or a sample pad with your colour list and request plate-making for the shades you plan to launch. Enquiries go through the contact form, and order requirements can be discussed directly on +86 13827489472.
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China