Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

What to include in a revision notice when changes to toe spacer shape references follow a quote for bulk EVA toe separators

Back to list Release Date: 11/20/2026

You asked for bulk EVA toe separators. The quotation came back, your purchasing team entered the item into the system, and then someone notices that your drawings call the same divider a "toe spacer" while our product page calls it a "toe separator" — and, on top of that naming difference, the shape on the sample is not quite the profile your technicians expected. That mismatch is not a crisis; it is a document-control problem, and it is settled with one clean revision notice rather than three emails and a phone call.

Below is what we ask buyers to put into that notice so the revised quotation, the tooling plan and the pre-production sample all move at the same time. It applies to custom EVA foam consumables made from your own drawings or samples, which is how every pedicure divider we ship is produced — whether you record it as a toe separator or a toe spacer.

Below is what we ask buyers to put into that notice so the revised quote, the tooling plan and the pre-production sample all move at the same time. Everything here applies to custom EVA foam consumables made from your own drawings or samples, which is how every pedicure divider we ship is produced.

1. State what actually changed: the name, the shape, or both

Name the change in one sentence that keeps three separate things apart:

  • Naming only. Your specification says "toe spacer", our product page says EVA toe separator, and the same item also sits under the nail-file and polishing-block category. If it is purely a wording difference, say so explicitly — no tooling change follows.
  • The shape. A different toe-gap profile, a thicker or thinner band, a different overall length. This does affect the cutting die.
  • Both. Renaming plus a new shape. Handle it as a shape change and let the naming follow behind it.

This distinction matters because a name swap costs nothing, while a profile change reopens the die question. Mixing the two in one line — "the shape is wrong" — is what causes a factory to hold your whole order while it asks for clarification.

2. Give the new reference drawing a number and a date

Attach the updated file, and label it. A revision notice that says "use the new shape" with an unlabelled attachment will be forwarded around your organisation and lose its meaning. Put on the drawing itself:

  • Your internal part number, not just our reference
  • A revision letter or version number that differs from the file behind the original quotation
  • The date of issue and the name of who approved it on your side
  • Which dimension changed — circle it, do not expect us to compare two PDFs visually

Our service team reviews submitted drawings and returns improvement suggestions where linework or tolerances would cause problems in production, so a marked-up drawing also speeds up that review rather than delaying it.

3. Restate the specification fields the shape touches

A shape change also moves several other specification fields. Confirm them in the same notice so nothing has to be asked twice:

FieldWhy a shape change touches it
SizeCustom per customer requirements; a new profile usually means new cutting or laser-cut tooling.
Material and colourColoured EVA, matched to your requirement. A thicker band can change how soft the divider feels under the toe, so state the feel you want rather than only the thickness.
Logo methodSilk-screen or heat-transfer printing. Print area is limited by the flat surface available, so a smaller profile can shrink what fits.
PackagingOPP bags or your own pack format. A changed part dimension changes the count per bag and per carton.
Quantity and reorder patternSalon consumables are usually reordered in batches; tell us whether the revised shape replaces all future volume or only a trial run.

If your order also includes companion items from the same EVA nail products range — nail files, polishing blocks, disposable spa slippers — say whether those stay on the original specification. Buyers often revise one consumable and silently assume the rest of the salon kit follows.

4. Ask for the revised quotation in writing, with the cost split out

Request a reissued quotation that shows the parts price and the tooling or plate charge separately. Sample charges depend on your artwork, so a notice that only asks "is the price still the same?" gets an answer you cannot compare against the first quote. A usable revised quote should show:

  • Unit price at your quantity, and the quantity band it applies to
  • Any new die, mould or print-plate charge caused by the shape change, listed on its own line
  • Sample cost and the sample lead time, which is normally 5–7 working days for these items
  • Bulk lead time from sample confirmation — commonly quoted as 25–30 working days, subject to adjustment for actual order conditions
  • Payment terms unchanged unless you negotiated otherwise: 30% advance, balance after pre-shipment inspection is passed

Keep the revised quote in the same thread as the original. When a claim of "we were told it would be cheaper" appears six weeks later, that thread is the evidence.

5. Confirm who signs off before tooling runs

Our custom order process runs through consultation, proposal and quotation, design drafts and renderings, mould opening and print moulding, signature confirmation, then the 30% deposit on contract. A revision that lands anywhere in that chain should name a single approver on your side. Two people approving two shapes is the most common cause of a re-run.

For buyers who want to see the revised profile before committing, the custom EVA foam product samples route lets you handle a physical sample of the new shape. It is also the point at which colour and print placement get checked against your brand guide.

6. Record the inspection reference for the revised item

A changed shape means the acceptance criteria change with it. Our production runs 16 types of tests covering areas such as colour fastness and tensile strength, with full manual inspection before shipment, and third-party inspection is supported. If you use your own incoming-inspection checklist or a third-party agency, send them the revised drawing at the same moment you send it to us — not when the goods arrive. Buyers who arrange their own checks can review our factory audits and inspections page before the first delivery.

A short template you can copy

Subject line: Revision notice — your part number, EVA toe separator, rev B, effective [date]

  1. Change type: naming only, shape, or both. State which.
  2. Previous reference: drawing rev A, quotation number [insert number].
  3. New reference: attached drawing rev B, changed dimension circled.
  4. Unchanged and still approved: material, colour, logo method, packaging, quantity.
  5. Requested from supplier: revised quotation with tooling shown separately; sample lead time; bulk lead time from sample confirmation.
  6. Approver on buyer side: name and title.
  7. Distribution: copy to incoming-inspection contact so acceptance criteria match rev B.

Send that as one message and the revised quote, the sample plan and the inspection reference all arrive on the same day. If you are sourcing these dividers alongside other bulk pedicure slippers or salon consumables from our factory, put the whole kit's part numbers in the notice so we can confirm which lines stay on rev A.

Send your drawings, samples and target quantities to our team, or call +86 13827489472 — Shenzhen Fulikai Packaging Products Co., Ltd. reviews every drawing before quoting.

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog