A retailer that sells rechargeable heated footwear usually discovers the need for a replacement charger range at the worst possible moment: the winter season is already underway, the boots on shelf are selling, and nobody in the buying office can say with certainty which power pack was fitted to which style. The question in the title is not rhetorical. Ownership of the battery and charging component list decides whether your replacement chargers arrive as a clean add-on SKU or as a stack of returns at the service desk.
This article covers three things a footwear buyer has to settle before any purchase order is raised: which party holds the power-component specification, what that specification has to contain for heated boots, insoles and slippers, and how a custom EVA foam manufacturing partner takes over that documentation when you are building your own range.
In practice the battery and charging component list sits with one of three owners, and each arrangement behaves differently once you start ordering replacement chargers.
If you are preparing a replacement charger range for a retailer, you are already committed to the third model. The rest of this article assumes it.
A specification that only says "rechargeable" is not a list. For heated footwear sold into cold-weather markets, each line item below needs a value or an agreed option, and the values differ across product types in the Non-slip & Heated Footwear category.
| List item | Why it matters for a charger range |
|---|---|
| Battery capacity and pack format | The heated boot and the insole listings on our site both describe a 10000mAh rechargeable pack, while the heated slipper is offered with two power routes — a hidden battery or a direct power supply. Capacity and format drive which charger you stock as a spare. |
| Number of packs per pair | The winter boot listing states 2 rechargeable batteries per pair, so one replacement charger has to serve two packs or you sell chargers in pairs. This single line decides your accessory pack size. |
| Heat settings and their temperatures | Our heated insole is listed with four levels — 35°C, 45°C, 55°C and 65°C — while the waterproof snow boot is listed with three levels from 45°C to 65°C. A charger or control unit that cannot address all levels of a given style will not be an acceptable spare. |
| Runtime at each setting | The insole listing gives a runtime range of 10 to 24 hours on the 10000mAh pack, and the snow boot listing describes heating for up to 8 hours. Publish the figure that belongs to the style you are selling, not one average across the range. |
| Charge input and connector | This is the field your replacement charger has to match exactly. Record it at sample stage, before tooling, because a connector change after approval reopens the whole list. |
| Protection and certification | The insole listing mentions over-heat protection, a frost-resistant wire rated to -40°C and a certified lithium-ion battery. Keep a copy of the pack's certificate with your list; retailers and marketplaces ask for it. |
| Washability and pack removal | The insole is described as washable and trimmable for EU sizes 34-46, the slipper as hand- or machine-washable. Whether the pack detaches changes both the care label and the spare-part logic. |
| Transport notes | The insole listing states the packs can be carried on planes and high-speed trains. Put that line into your retail copy, because shoppers look for it. |
Fulikai is a Shenzhen EVA foam products manufacturer working to customer drawings and samples, and heated footwear sits inside the same order flow as the rest of the catalogue. The published cooperation process runs through needs consultation, proposal and quotation, design drafts and renderings, mould opening and print moulding, signature confirmation, and a 30% deposit on signing the contract. The power-component list belongs to the first two steps, not to production, because by the time a mould is cut the pack and its connector are already fixed.
Two parts of that flow matter most for a charger programme:
Documentation continues after that point. The factory operates under an ISO 9001:2015 quality management system and holds CE, EN-71, FDA, FCC, RoHS, SGS and REACH certificates, and its stated practice covers 16 types of test during production plus full manual inspection before shipment, with support for third-party inspection and buyer audits. Ask for the certificate set that applies to your destination market and to the battery specifically, rather than assuming one certificate covers the whole range.
Once the list exists, the accessory programme becomes arithmetic. Group your styles by charge input and by pack count per pair. Where two styles share both, one spare charger SKU covers both shelves. Where they do not, you either sell a paired charger or you consolidate the styles at the next development round — which is the cheaper option, and it is only available to buyers who own the specification.
The answer to the title's question, then: the buyer who wants a replacement charger range has to own the battery and charging component list personally, through their own specification. Anyone relying on an intermediary's or an assembler's list is buying whatever was available at the time — and will be matching chargers to guesswork when the retailer asks.
Bring your power-component requirements to our team and we will review them with you before any tooling decision. Custom Capabilities · Custom product order process · Send an enquiry · Hotline +86 13827489472
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China