Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

What should suppliers itemize separately from multi-piece kit pricing when quoting EVA surfboard traction pads for a coastal importer developing its first private label pad?

Back to list Release Date: 11/19/2026

A coastal importer placing a first private label order rarely has a problem with the headline unit price of an EVA surfboard traction pad. The difficulties start afterwards, when three items that were bundled into one kit price turn out to be separate decisions: how many pieces the set is cut into, whether the adhesive interlayer is included or upgraded, and what has to be paid for before any foam is cut. This article sets out which cost elements a supplier should put on their own line of the quotation, so that a first private label pad can be compared across factories on the same basis.

The kit price hides three decisions the importer still has to make

Ask five factories for a quote on a traction set and you will usually get one number per set. That number quietly contains choices that change both cost and performance, and that an importer developing their own label may want to control rather than inherit.

Piece count is the first. Our catalogue carries sets in several layouts for a reason: a 3-piece surfboard tail pad with diamond texture and drainage holes, a 12-piece paddle board traction pad covering roughly 77 by 25 inches in total with a built-in tail kicker, and a 4-piece dog traction pad at 53 by 32 cm. More pieces means more cutting passes, more individual backing liners, and more separate pieces to pack — so the piece count is a cost driver, not only a design preference.

The adhesive interlayer is the second. Our traction products use a marine-grade self-adhesive backing, and on the surfboard tail pad that backing also has to release cleanly without leaving residue or damaging the board finish. A quotation should state which adhesive system is priced into the set. If an importer wants a different grade for saltwater use, that swap belongs on its own line.

The third hidden decision is finishing. A plain grooved pad and a printed pad carrying brand artwork are not the same product, even when the foam blank is identical.

Itemize these six elements instead of one kit price

For a first private label order we ask buyers to review a quotation that separates the following. Each line can be adjusted without renegotiating the others.

  • Foam blank and material grade. Our pads are made from closed-cell EVA foam; the 12-piece SUP set is built from A-grade foam with certified resin. Density and grade should be stated, because they drive both weight and how long the grooves hold their shape.
  • Groove depth and texture. The paddle board set uses 3 mm deep diamond grooves; the surf tail pad adds drainage holes across the surface. Depth and pattern are cutting work, so they belong in the tooling and blank line rather than being assumed.
  • Piece count and layout. State the number of pieces per set and whether a tail kick or kicker is included, as on our SUP traction pad. A layout change alters pack contents as well as cutting time.
  • Adhesive interlayer and liner. Name the adhesive grade and the release liner. This is the element most often quoted inside a kit price and upgraded later at short notice.
  • Printing, tooling and plate charges. Colour on our EVA is formed in one-step foaming with added colour masterbatch, and artwork goes through heat-transfer printing. Plate-making is charged separately from the unit price; see our page on heat transfer printing on EVA foam.
  • Sample cost and sample lead time. Sample charges depend on the artwork supplied, and samples take around 5 to 7 working days. These are pre-production costs and should not be blended into the bulk unit price.

Read the three lead times separately as well

The SUP traction pad listing in our sample centre states a lead time of 25 to 30 working days after sample confirmation, subject to adjustment for actual order conditions. Elsewhere on the site we describe plate-making taking 5 to 7 days and bulk orders being delivered within 15 days. Those figures cover different stages and different products, which is why an itemized quotation should show plate time, sample time and bulk production time as three separate dates rather than one delivery promise.

Payment terms belong on their own line too

Our standard structure for custom orders is a 30% advance payment, with the balance of 70% paid after the pre-shipment inspection is passed. That wording matters for an importer building a first private label program: it ties the balance to an inspection result rather than to a calendar date, and it sets out what must be approved before money moves. Terms should appear on the quotation as a stated line, not in a footnote.

What supports an itemized quote behind the scenes

Splitting a quote into real cost elements only works if the factory actually controls those elements. Our Shenzhen site runs its own foaming, cutting, stamping and laser processing lines across more than 3,000 square metres, which is what makes shape and colour changes quotable from customer drawings or samples — see custom EVA foam cutting and stamping.

On the finishing side we use self-developed heat-transfer printing with multi-pass white-base printing, so a printed private label pad is produced in-house rather than subcontracted. On the material side, tell us the destination country and we recommend raw materials matched to that market's requirements; details are on our page about EVA foam colour matching and material selection.

For the quality line, production runs through 16 types of tests covering areas such as colour fastness and tensile strength, with a full manual inspection before shipment and support for third-party inspection — see EVA foam factory audits and inspections. A quotation that lists an inspection step can be verified; one that only implies quality cannot.

A short checklist for the first private label pad

Before signing, line up six questions and ask each supplier to answer them in writing: which board model the set is cut for; how many pieces per set and what the set includes; which adhesive grade and liner; which print method and what the plate charge is; what sample cost applies to this artwork and when the sample ships; and which inspection must pass before the balance falls due.

If a supplier answers all six with separate figures, the quote can be compared line by line against another factory's quote. If any answer comes back as "included", that is the element to pin down before artwork is submitted, because it is also the element most likely to be repriced later in the program.

As an OEM and ODM EVA foam manufacturer, we quote traction pads on this split basis for importers building their first own-label pad, and buyers can review existing samples before committing to tooling.

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog