A teacher supply shop that wants to add a color sorting range rarely buys one item at a time. Teachers walk in asking for dice, then ask whether the same kit can include counting cubes, a storage bag and printed number cards. Budgeting for that kind of mixed classroom kit packing is different from budgeting a single SKU order: you are pricing components, packaging labor, color consistency across materials, and the sampling round needed before a school district or independent school signs a purchase order. The steps below follow how a custom EVA foam products manufacturer normally quotes these kits, so you can build a cost sheet that holds up when the second order arrives.
Mixed kits go wrong in budgeting when the buyer prices them as one product. Split the kit into three cost groups and quote each separately.
| Cost group | What to confirm with the factory | Where buyers get surprised |
|---|---|---|
| Core foam pieces | Piece count per set, size of each piece, printed or plain faces, color list per set | A set that mixes printed dice with plain cubes needs two tooling paths, not one |
| Packaging and assembly | Bag type, whether the bag is supplied with the pieces, label or insert card, how many pieces are hand-packed per set | Hand-packed kits cost more per set at small quantities than at full container volume |
| Sampling and print plates | Sample time, plate-making time, sample plate cost, who pays courier for samples | Buyers budget the unit price and forget the one-time plate and sample line |
Our EVA foam dice are a 20mm (0.78 inch) six-sided die with printed pips, supplied in six colors — red, yellow, blue, green, orange and pink — and offered in a bulk pack of 300 pieces per set with a colorful box. The counting cubes in the same catalog line are solid cubes with smooth flat faces and no printed dots, in six rainbow colors including purple, and they ship with a reusable non-woven drawstring bag. Read those two pages side by side before you write your cost sheet: one component carries printing, the other carries a bag, and each pulls the kit price in a different direction.
A color sorting range only works if the red in the dice matches the red in the cubes. Two ways to achieve it carry very different costs.
For a classroom range, the practical budgeting rule is simple: keep the body color of every component in the masterbatch route, and reserve printing for pips, numbers and your shop's own logo. That way one approved color standard covers dice, cubes and any mat or block you add later, and you are not paying new plate fees every time the range grows.
Teacher supply buyers almost always want to see a physical kit before committing, and schools want the same. On our dice page, sample time is 5–7 working days and the sample fee depends on your artwork; plate-making runs 5–7 days, with a fast five-day turnaround available at competitive pricing and sample plates costing only a few hundred dollars. Budget one sampling round as a fixed line item, then plan a second round only if you change colors or piece sizes.
The custom order process behind all of this is published: needs consultation, proposal and quotation, design drafts and renderings, mold opening and printing molding, signature confirmation, then a 30% deposit on signing the contract. Full terms are on the custom EVA product order process page. Our dice line follows the same commercial pattern: 30% prepayment, with the remaining 70% due after a successful inspection before shipment.
Work from component to kit to container, and keep each layer on its own row so a price change does not force you to rebuild the whole sheet.
| Layer | What goes in | Timing to plan around |
|---|---|---|
| Component | Foam pieces by color and size, printed faces where required | Plate-making 5–7 days; sample 5–7 working days |
| Kit assembly | Pieces per kit, bag or box type, insert card, hand-packing count | Confirm before the sample so packing is not redesigned later |
| Compliance and inspection | Material recommendation for your destination country, tests, third-party inspection if you use one | 16 test types run during production; full manual inspection before shipment |
| Freight and reorder buffer | Shipping to your door, plus a reorder lead time allowance | Bulk orders can be delivered within 15 days; the dice page quotes 25–30 working days after sample confirmation |
Those two lead times are not the same number and should not sit in one cell of your sheet. Fifteen days is what our delivery and 24-hour service page states for bulk order delivery; 25–30 working days after sample confirmation, adjustable to actual order conditions, is the figure printed on the dice product page. Plan your school-term deadline against the longer figure and treat the shorter one as upside.
Classroom products for young children attract specification questions from school buyers, so ask the factory to state what applies to your order rather than assuming. Tell the manufacturer the destination country and they will recommend raw materials that meet the corresponding national standards — our team does this as a normal part of quoting. Our Shenzhen factory is certified to ISO 9001:2015 and holds CE, EN-71, FDA, FCC, RoHS, SGS and REACH certifications; which certificate or test report applies depends on the product, market and order, so request the specific document for your kit.
On the inspection side, all products pass through 16 types of testing during production, covering color fastness, tensile strength, ink environmental-protection testing and children's product safety testing. Before shipment we carry out full manual inspection and reject defective items, and we support 100% third-party inspection if your buyer requires one. Our factory also holds audit reports from Coca-Cola, Walmart and Sedex, and we welcome audits conducted by the customer. More detail is on factory audits and inspections. None of this should appear as a surprise line item if you raise it during the quotation stage.
A color sorting kit earns more when it grows into a shelf program instead of sitting as a single SKU. With the color standard already approved, adding components from the same material family keeps cost predictable:
Order these under one approved color standard and one packing specification, and you are negotiating volume across components rather than repeating setup fees. If you are selling through an online channel as well as a shop counter, our custom EVA foam products for cross-border e-commerce line covers retail-ready packing for puzzles and blocks.
Get a kit quotation from the factory
Send us your component list, piece count per kit and destination country. As a Shenzhen custom EVA foam manufacturing partner working with OEM and ODM orders, we will return a proposal and quotation with sample timing, plate costs and packing options laid out line by line.
Order hotline: +86 13827489472 | Email: sales@fulikaisz.com.cn | Contact us
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China