Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

Diag probe only

Back to list Release Date: 11/22/2026

Yes. In most cases a set of letters or numbers you already paid for can be reused on a later order — but only when the character geometry, sheet thickness and print method still match what the new SKU needs. The die is usually the expensive part of an alphabet program; the artwork plate is not. Before you ask your supplier to "use the old tooling again", work through the checks below so you know exactly which costs carry over and which ones do not.

What a previous project actually leaves behind

A bath alphabet order normally produces three separate assets, and each one behaves differently when it sits idle between orders:

  • The cutting die or laser file. Fulikai cuts custom shapes by stamping and laser cutting from your drawing or sample. The die is a physical tool held at the factory; the vector file can be re-output at any time. If the character outline on the new SKU is identical, this asset transfers intact.
  • The heat-transfer print plate. Printing on EVA foam uses self-developed heat-transfer technology with multi-pass white-base printing, so the colour sits on the foam rather than soaking into it. Plates are inexpensive compared with a die — our published custom-capability page describes sample plates as costing only a few hundred dollars, with a five-day plate-making turnaround.
  • The colour formula. Colour is introduced at the foaming stage through masterbatch, so an exact Pantone match from a previous run can be repeated without a new compounding job — provided you use the same base foam grade.

The practical conclusion: reusing an old letter set usually saves tooling money and one round of sample approval. It does not automatically save anything on printing, because a fresh plate is cheap and quick to make anyway.

Four checks before you approve the reuse

CheckWhat has to matchIf it does not match
Glyph geometryThe exact outline of each letter and number, including stroke width and corner radius.A new die is required. Rounded corners matter: our bath sets are specified with smooth, burr-free edges, so a re-cut has to reproduce that profile.
Sheet thickness and densityThe gauge the old die was built for, plus foam hardness.A die cut for a thinner sheet can crush or feather a thicker one. Confirm the gauge before quoting reuse.
Finished character sizeOverall height per piece. Our listed bath letter sets are specified at roughly 3 inch, while our EVA alphabet set is specified at 2.5–3 inch.A size change means a new die and a re-check of the pack layout and any mesh bag or window box.
Print versus plain cutWhether the earlier project printed letters onto the foam or cut the letter shape itself.These are different processes. A cut-letter die cannot be swapped into a printed-letter SKU without re-engineering the artwork and registration.

Where reuse breaks down in real orders

Three situations come up repeatedly with alphabet SKUs, and each one changes what "reuse" means:

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog