| Check | What has to match | If it does not match |
|---|---|---|
| Glyph geometry | The exact outline of each letter and number, including stroke width and corner radius. | A new die is required. Rounded corners matter: our bath sets are specified with smooth, burr-free edges, so a re-cut has to reproduce that profile. |
| Sheet thickness and density | The gauge the old die was built for, plus foam hardness. | A die cut for a thinner sheet can crush or feather a thicker one. Confirm the gauge before quoting reuse. |
| Finished character size | Overall height per piece. Our listed bath letter sets are specified at roughly 3 inch, while our EVA alphabet set is specified at 2.5–3 inch. | A size change means a new die and a re-check of the pack layout and any mesh bag or window box. |
| Print versus plain cut | Whether the earlier project printed letters onto the foam or cut the letter shape itself. | These are different processes. A cut-letter die cannot be swapped into a printed-letter SKU without re-engineering the artwork and registration. |
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China