Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

How to review double-sided machining and carton costs after the factory revises the specification for double-sided EVA floating mahjong trays

Back to list Release Date: 11/16/2026

A revised drawing usually arrives by email at 6 a.m. your time: the tile groove on one side of the double-sided EVA floating mahjong table moves from one row to two, or the tray gains four moulded cup holders. Nothing else in the file changes. What does change is everything you already sent downstream — the machining sequence, the nesting sheet, and the carton quote that your forwarder gave you last month.

This article walks through what to re-check after such a revision, in the order the numbers actually reach you: machining first, then tooling and printing, then the carton. The examples use the floating game trays we already make for pool and beach programs, because one product line shows all three cost lines at once.

Where a double-sided revision changes the work

A single-sided tray is cut from one side. A double-sided tray has features on both faces — tile grooves on one face, cup holders or a plain play surface on the other — and that flips two practical questions:

  • Which face is the datum? The first cut fixes the reference face. If the second face is machined or die-cut against a different reference, features drift out of registration. Groove depth and slot spacing are what buyers complain about later, so state the datum face on the drawing itself, not in an email.
  • How thick is the core? A groove cut from both sides eats into the same sheet. If each face needs 10 mm of feature depth and the foam is 20 mm thick, the two features meet. That is why our floating trays are specified as thick rigid or high-density EVA rather than thin sheet — the 31.5-inch pool tray we list is a one-piece carved board, and the salt-alkali resistant version carries double-row tile slots on one face.
  • Is it one piece or a lamination? Two laminated sheets allow different colours per face, but add a bond line that sits in water all season. One-piece carving has no glue line to open up. We quote both, and the choice moves the price more than most buyers expect.

Machining: what to re-cost after the revision

Send the revised drawing to the factory and ask for these five items in writing. Anything less, and you will compare two quotes that are not measuring the same thing.

ItemWhy it moves after a revision
Cutting methodWe cut by stamping and by laser cutting. Deep grooves and one-piece carving suit a die or a mould; shallow contour work suits laser. Switching methods changes both the unit price and what you pay once up front.
Tooling and mouldA new groove layout usually means a new die or mould cut. Ask which existing tool can be modified instead of replaced, and get the modification price next to the replacement price.
Second-face setupThe second face is a separate pass with its own fixture. Ask whether the quote includes it or assumes the first pass does double duty.
Nesting and scrapA larger tray or deeper slots reduce how many pieces fit per sheet. The sheet price may be unchanged while the effective cost per piece rises.
Inspection scopeTwo working faces means two faces to inspect. Every unit we ship passes manual pre-shipment inspection, and production carries 16 types of in-process tests including colour fastness and tensile strength — see quality control. More features per face means more gauges to check.

One caution on the numbers themselves. Our product pages do not always state thickness the same way — two listings for a similar 31.5-inch tray describe different thicknesses. Do not lock a groove depth against a nominal sheet thickness from a webpage. Confirm the thickness on your own approved sample and write that measured figure into the purchase order.

Printing and colour: the second face has its own cost

Double-sided often means printing on both faces, or printing over a groove field. Our heat transfer printing on EVA foam is done with a white base so the foam colour does not show through, and colour is formed in one-step foaming with masterbatch rather than painted afterwards — see raw materials and colour matching.

What that means for your revision:

  • A new print area needs a new plate. Plate-making takes 5–7 days, so the tooling line and the printing line should be quoted together, not in sequence.
  • Printing across grooved surface is not the same job as printing on flat surface. Ask for a printed sample on the actual groove geometry before you approve artwork.
  • If the revision moves a logo across a groove or into a cup holder, expect an artwork change and a new plate — not a free edit.

Carton cost: the line buyers re-check last and regret most

A thicker or larger tray changes the outer carton, and the outer carton is where freight is decided. Three things to recalculate before you accept a revised unit price:

  • Pieces per carton. A thicker tray stack usually means one fewer tier in the outer carton. The unit price at the factory can stay flat while your landed cost per piece rises, because the same container now holds fewer saleable units. Ask for the revised pieces-per-carton figure before you accept a "no change" quote.
  • Carton dimensions against your pallet and container. Ask the factory for the revised inner and outer sizes plus packed weight, then check them against your existing pallet pattern. Do not let a forwarder quote on an old carton dimension.
  • Protecting the printed face. Two finished faces means two faces that can rub. Interleaving and corner protection are cheap; a return of scuffed retail units is not. Specify the interleaving in the packing instruction, since it is not automatic.

For water game sets this matters more than usual. A set such as our EVA pool mahjong tiles with dice and a storage bag ships several components plus a bag, so a revision to the tray ripples into the insert, not just the carton. Ask for the revised packing drawing, not just revised dimensions.

How to run the revision without losing two weeks

The order process we work to is consultation, proposal and quotation, design drafts and renderings, mould opening and print moulding, signature confirmation, then a 30% deposit on the signed contract — see the custom EVA product order process. A specification revision restarts the quotation step, so treat it as a formal change and keep it in one place:

  1. Issue one revised drawing with a version number and date, and mark what changed on the drawing itself.
  2. Ask for a quote that separates tooling, unit price at two quantities, plate cost, and packed carton data. Bundled numbers cannot be compared against your previous quote.
  3. Confirm which face is the datum and what the measured core thickness is on the approved sample.
  4. Re-approve a physical sample before tooling is cut for production, especially when features moved to the second face.
  5. Re-issue the packing instruction with the revised carton, then re-quote freight on the new dimensions.

As an OEM and ODM EVA foam manufacturer working from buyer drawings, we can price a revised specification against the previous one in the same quotation, which is the fastest way to see what the change actually costs. Our water sports goods range covers floating trays, tiles and swim boards that share the same cutting and printing lines, so mixed orders are usually worth asking about.

Send us the revised drawing and the carton you are shipping today, and we will come back with tooling, unit price and packed dimensions against your current version. Phone or WhatsApp: +86 138 2748 9472 — or send your requirements through the contact page at fulikaisz.com.

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog