Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

How to Calculate Landed Cost for waterproof heated snow boots Using Two Supplier Quotes

Back to list Release Date: 11/16/2026

A supplier price that looks lower can end up costing more once the battery, the outsole hardware and the packing are counted. Heated footwear is not a single unit price: it is a boot plus a lithium battery plus paperwork, and each of those moves the number you actually pay at your warehouse door. This guide walks through how to take two quotes for waterproof heated snow boots with three heat settings, put them on one sheet, and compare what lands rather than what was quoted.

The method below uses only figures the two factories give you. Nothing in the comparison needs a market benchmark or an industry average — if a number is not on a supplier's quote or in your own freight invoice, it does not go into the sheet.

Start from a unit you can actually sell

Landed cost is only useful if the two quotes describe the same saleable unit. Before you look at any number, write down what one unit contains for each supplier: the boot itself, the battery pack and charger, the retail box or polybag, the spare fuse or heating element if one is offered, and whether accessories travel in the same carton or in a separate one. A quote that ships the battery loose in a different carton changes your packing labour at destination, so it belongs in the calculation even though no line on the invoice says so.

For heated boots this step matters more than for ordinary footwear. Our rechargeable heated winter boots are listed with a 10000 mAh battery, a forefoot heating zone and a rubber-MD outsole fitted with stainless-steel ice claws. A separate model in the same category is described with a bonded-leather upper, three heat settings and retractable claws. Both read as "heated snow boots" on a purchase order, but the bill of materials behind them is different, and that difference is where landed cost diverges.

Ask each supplier for the same eight lines

Send an identical specification sheet to both factories and require the same breakdown. If the two quotes arrive in different formats, normalise them into one table before comparing anything.

Cost lineWhat to pin down on the quote
Unit price and trade termWhether the figure is EXW, FOB or a delivered term, and which port or terminal it stops at.
Upper, lining and outsoleNamed materials — bonded leather or ox-fibre upper, fleece and sponge lining, rubber-MD sole — not "as per sample".
Battery and heating systemCapacity in mAh, number of heat settings, heating zone, whether the charger and cable are included.
Tooling and mould costWhether any die or mould charge is inside the unit price or billed once up front.
PackagingRetail box, polybag, inner carton, master carton, and pieces per carton.
Carton count, weight and volumeTotal cartons, gross weight and CBM for the whole order quantity.
Test reports and certificatesWhich documents are supplied free, and what each extra report costs.
Payment termsDeposit percentage, balance trigger, and any bank charge you absorb.

Two details decide most of the spread. The first is pieces per carton: a supplier who fits more pairs in one carton lowers your freight per pair even at a higher unit price. The second is battery capacity, because a larger cell can bring stricter handling and documentation requirements on the shipment — a factor our washable rechargeable heated insoles buyers run into as well.

Build the landed-cost formula

Work per pair, not per order, so the two quotes stay comparable even if the quantities differ. Take the quoted unit price at the stated term, then add each cost that occurs between that point and your shelf.

  • Inland haulage from the factory to the port, if the quote is EXW.
  • Ocean or air freight, divided by the number of pairs in the shipment rather than applied as a lump sum.
  • Insurance on the goods value.
  • Duty and import taxes assessed on your declared value at destination.
  • Port fees, terminal handling and customs brokerage.
  • Delivery from the port to your warehouse.
  • Battery-related surcharges: declaration work, a carton built to dangerous-goods rules, or a carrier that charges more for cells packed with goods.
  • Incoming inspection and any rework, spread over the pairs that pass.

Then add two lines most buyers forget. Amortise one-off tooling over the order quantity: a mould fee split across a small test order lands on each pair much harder than the same fee split across a full production run. And put a number against returns — heated footwear can come back for battery and heating-element faults, so a replacement allowance belongs in the cost of a pair that sells.

Run the comparison on identical quantities

Quote both suppliers at the same quantity and check the break points. A factory with a higher standard minimum may quote better at a larger run, while another holds its price at small quantities. Our published standard minimum for custom footwear is 1,000 pairs, so if you are testing a new heated boot below that, expect the two quotes to sit on different footing and normalise before deciding.

Read the lead time as a cost too. Product pages in this category list production of 25–30 working days after sample confirmation, while our delivery and service page states that plate-making takes 5–7 days and bulk orders can be delivered within 15 days. Ask each supplier which figure covers your build, then compare the two delivery dates against the week your retail programme needs stock. The gap between those dates is a real cost: boots that arrive after the season opens may have to be discounted or carried into next year, and neither outcome appears on a freight invoice.

Check what the cheaper quote left out

A lower unit price usually comes from one of four places, and each has a downstream cost. A thinner upper or a simpler outsole costs less to make but may not pass the slip or abrasion test your retailer requires. A smaller battery lowers component cost and shortens wear time in the field. Packing reduced to a polybag saves volume now and costs shelf presence later. And paperwork moved to "customer to arrange" shifts the work and the fee onto you.

Ask for the reports before you commit. Our quality control process runs sixteen types of production tests with full manual inspection before shipment, and we support third-party inspection and buyer audits — see factory audits and inspections. If one quote includes that work and the other quotes it separately, the two unit prices are not measuring the same thing. The same applies to materials: tell the factory your destination country and ask which raw materials are matched to the standards that apply there.

One caution on certificates. Our company pages and our custom capabilities page list different certification sets, so treat any certificate claim as something to confirm for your specific product, market and order rather than assuming it carries across the catalogue. Put the exact report names you need in the enquiry and make each supplier state which ones they hold.

Send both quotes through the same order process

Once a supplier wins on landed cost, lock the number in writing at each stage of the custom order process: requirements consultation, proposal and quotation, design drafts and renderings, mould opening and print moulding, signature, then a 30% deposit on signing. Any change after sign-off — an added heat setting, a different charger, a new box — reopens the freight and duty lines, so recalculate before approving it.

As a custom EVA foam products factory in Shenzhen, we also supply the surrounding parts of a winter programme — rechargeable heated slippers, boots and insoles, traction pads and mats — which lets you consolidate lines into one shipment instead of paying freight twice. Send us both quotes and your target shelf price, and we will show you where the difference between them actually comes from.

Talk to our team about heated footwear for your next season: send an enquiry or call +86 13827489472.

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog