A purchase order for wholesale EVA flip flops usually arrives with two separate decisions attached. The first is what the product looks like: sole construction, strap style, print or embossed logo. The second is how that product is split across colours and sizes. Buyers who order one specification in depth are running a single-SKU programme; buyers who split the same quantity across colourways and a size ladder are running an assorted order. Both are routine for a custom promotional flip flops factory, and both change your landed cost, your stock cover and how fast the goods reach a shelf or an event.
This guide compares the two ordering models from a buyer's side of the desk: what each one protects you against, where the money goes, and which production details at the factory floor make an assortment practical rather than expensive.
Single-SKU means one item code, one colour combination, one print, one size curve — repeated in volume. A resort chain restocking 5,000 pairs of the same black thong sandal for guest use is a single-SKU order. So is a supermarket private-label drop of one printed design in a fixed size run.
The commercial case for it is control. One tooling set, one print plate, one colour formula, one artwork approval. Because the whole quantity runs on the same setup, you can push the order into fewer production stages and hold quality checks against one reference sample instead of several. Where a design carries an all-over graphic, that matters: heat-transfer printing on EVA foam is set up per artwork, and repeating one plate across the full quantity avoids re-plate work between colourways.
Single-SKU also simplifies compliance paperwork. If you sell into a market with specific material requirements, one specification means one material decision to document. At Fulikai, colours are formed during one-step foaming with added colour masterbatch, and the team recommends raw materials matched to your destination country once you state it — a single conversation for a single-SKU order rather than a separate confirmation per colourway.
An assorted order spreads one purchase across variants. Three common shapes:
Assortments are the normal choice for cross-border sellers and gift programmes, where the customer chooses at checkout or at the counter. The printed models in our sample range ship as multi-colourway assortments precisely because that is how retail buyers list them. A promotional buyer running a summer campaign wants pink, white and black on the same pallet, not three separate deliveries.
| Cost driver | Single-SKU order | Assorted order |
|---|---|---|
| Print plate and artwork setup | One plate, amortised over the whole quantity | One plate per print design; more designs mean more plate cost |
| Colour and material decision | Single masterbatch formula confirmed once | Each colourway confirmed, matched to the destination-country standard |
| Production changeover | Minimal; one continuous run | More changeovers between colours and sizes |
| Packing and labelling | Simple, uniform cartons | Size-run packing lists and per-variant labelling |
| Stock cover after arrival | Deep on one item; risk of unsold specification | Broad cover; slower-moving variants still occupy space |
| Reorder speed | Fast — the same setup is already proven | Depends on which variant you reorder first |
The practical point: an assortment does not automatically cost more per pair in material terms. The extra cost is concentrated in setup and changeover — plates, colour confirmations, packing complexity. That is why an assortment of colourways on one sole tooling behaves very differently from an assortment of four separate printed designs.
If your programme depends on vivid graphics, the plate and print process decides how many variants you can afford. Fulikai's heat-transfer printing runs with a white base so the underlying foam colour does not show through, which is what makes saturated graphics viable on light and dark soles alike. Plate-making takes 5-7 days, and sample plates cost only a few hundred dollars, so testing two or three print options before committing to a full assortment is a normal step rather than a special request.
For logo-led work there is a cheaper variant route. Embossed and hollow-out logos are cut into the EVA itself instead of printed, which means a brand mark can appear across several colourways without a separate print plate for each one. That is the reason hollow-out logo flip-flops are popular with brand merchants who want colour variety on a tight budget.
Two figures anchor the planning. The standard minimum order quantity is 1,000 pairs; smaller trial runs have been handled case by case where the specification justified it. Bulk production can be delivered within 15 days once the order is signed, with a 30% deposit on contract signature. If you are comparing a single-SKU run of 1,000 pairs against an assorted order of 1,000 pairs split three ways, your per-variant depth drops to roughly 333 pairs — which is exactly the number to test against your expected sell-through before you choose.
Assortments multiply inspection points, so ask what a factory actually tests rather than what it claims. Each production run passes through 16 types of testing, covering colour fastness, tensile strength, ink environmental testing and children's-product safety where relevant, with full manual inspection before shipment. The Shenzhen site holds ISO 9001:2015 certification along with CE, EN-71, FDA, FCC, RoHS, SGS and REACH documentation, and supports third-party inspection and buyer audits. Ask which certificate or test report applies to your specific product and destination market — the applicable document follows the article you are importing, not the factory as a whole.
A useful enquiry states the total quantity, then the split: number of colourways, size ladder per colourway, and print versus embossed logo per variant. With that one message a manufacturer can quote both models against each other honestly — one specification in depth, or the same quantity spread wider — and tell you which is cheaper once setup and packing are counted.
Send your specification, drawing or sample photo to Fulikai's enquiry page, or call +86 13827489472. Include your destination country so the raw-material recommendation and the applicable test documentation are settled in the first reply instead of the third.
Tel
+86 13827489472
+86 13827489472
sales@fulikaisz.com.cn
5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China