Welcome to the official website of Shenzhen Fulikai Packaging Products Co., Ltd.

Shenzhen Fulikai Packaging Products Co., Ltd.

With 19-year experience in manufacturing & customizing EVA foam products.Certified by Coca-Cola, Walmart & Sedex, supporting factory audits.

Custom Service Hotline+86 13827489472+86 0755-29018797

Fulikai - Fast production and delivery within 15 days
Your position: Home > Blog

How to check the pricing impact of adding a variant to an order for portable EVA trays for pool and beach games with carton volume and storage costs

Back to list Release Date: 11/21/2026

A second colour, a double-sided surface or one more accessory looks like a small change on a floating EVA game tray. On the invoice it rarely stays small. This guide walks through the four places a new variant actually costs money — tooling, per-unit processing, carton volume and storage — so you can price the change before it reaches production instead of after.

Start with what the base tray already is

Fulikai's water game trays are one-piece moulded or carved closed-cell EVA panels. The published listings describe tile-holder grooves on four sides, corner drink holders — one listing sizes them for cups up to 3.35 inches in diameter — outer slots for phones and small accessories, and no inflation, pump or assembly. Sizes shown on the site centre on a 31.5 x 31.5 inch (80 x 80 cm) panel; tray thickness varies by listing, so confirm the exact gauge on the quotation rather than assuming one number applies across the range.

That construction matters for costing. A single rigid foam panel with no air chamber has fewer failure modes than an inflatable table — nothing to leak — but its dimensions are fixed by the mould or cutting die. Any variant that changes thickness, groove layout or surface area touches the same tooling that sets your unit price.

Classify the variant before you ask for a price

The fastest way to get a meaningless quotation is to say "we want another version." Ask instead which of these three buckets your change falls into, because each one has a different cost driver.

Variant typeTypical examples on an EVA game trayWhere the money goes
Decoration onlyNew print artwork, colour change via masterbatch, logo placementPrinting plate and set-up; unit price moves little if geometry is unchanged
Geometry on the same tooling familyExtra slot row, changed groove pitch, different cup-holder countPlate or die revision plus a re-run of first-article checks
New toolingDouble-sided layout, thicker panel for higher buoyancy, new overall sizeMould opening and print moulding up front, then a new per-unit resin and carton profile

Fulikai's custom EVA foam manufacturing page describes in-house foaming, stamping and laser cutting, one-step colouring with masterbatch, and heat-transfer printing with a white base for coverage. In practice that means a colour or artwork change is usually the cheapest variant to approve, while anything that alters panel thickness or double-sided function tends to reopen the tool.

Price the tooling as a one-off, not hidden in the unit rate

Ask for plate and mould costs as separate line items. Fulikai quotes 5–7 days for plate-making with sample plates at a few hundred dollars, and bulk production inside 15 days once approvals are signed off, with a 30% deposit on contract signature. Those numbers let you model the variant honestly:

  • Divide one-off tooling by your realistic first-order quantity to see the true per-unit burden.
  • Ask what changes on repeat orders — whether the same die is reused or a revised plate is charged again.
  • Confirm lead time for the variant, because 5–7 days of plate work plus 15 days of production sits in front of your ship date whether or not you order it.
A variant that costs a few hundred dollars in tooling is trivial across a full container and expensive across a trial order. Run the division before you decide, not after.

Carton volume is where a "small" variant quietly doubles your freight

EVA foam is light but bulky. Freight on these products is normally charged on volumetric weight, so the carton's cubic metres matter more than its kilograms — and thickness drives both. A tray listed at 0.2 inch (5 mm) in one listing and a thicker reinforced panel in another will not pack the same way, even at an identical 31.5 x 31.5 inch footprint.

Before approving a variant, request the packed data for that specific variant:

  • Inner pack and master carton dimensions in cm, plus units per carton and gross weight
  • Total CBM for your order quantity, and cartons per 20ft and 40ft container or per pallet
  • Whether the tray ships flat, stacked, or nested — nesting can recover a surprising share of volume on thin panels
  • Whether the variant's added thickness changes carton count at your target quantity

Then do the arithmetic that most buyers skip: landed cost per unit = ex-works unit price + (freight for total CBM ÷ units). If a thicker buoyant panel adds one more carton per ten, your freight line rises even when the factory's unit price does not. Retail and marketplace sellers shipping into warehouse storage feel this twice — once inbound, once on storage fees charged by volume.

Storage and SKU carrying costs belong in the decision

Every variant is another SKU to store, count and sell through. Pool and beach game trays are seasonal: the site positions them for pool parties, hot tubs, lake trips and beach gatherings, which concentrates demand into a selling window. A variant that misses that window sits in storage until next season while still occupying volume.

Practical ways to hold the risk down:

  • Order the base tray deeper and the variants shallower, so slow colours do not anchor your whole buy.
  • Ask whether variants share one master carton size; shared cartons simplify storage and picking.
  • Keep printed or colour-specific artwork on the shortest possible lead time — Fulikai's 5–7 day plate-making makes a late-season reorder realistic where a new mould would not be.

A quick pre-production checklist

  • Variant classified as decoration, geometry or tooling — and quoted that way
  • One-off plate or mould cost shown separately, divided over your real quantity
  • Packed dimensions, units per carton and total CBM for the variant, not the base item
  • Landed cost recalculated on the new volume before you commit
  • Season and sell-through window checked against the storage cost of carrying leftovers
  • Approvals signed with a 30% deposit only after first-article confirmation of the variant

If you are comparing several tray designs at once, our sample centre lists the current EVA pool and beach game trays with their published specifications, and the custom order process sets out each step from consultation to shipment.

Send us the tray you are buying and the variant you are considering. As a Shenzhen EVA foam products manufacturer, we will quote tooling, unit price and packed carton volume for that exact configuration so the change is priced before production starts — hotline +86 13827489472, email sales@fulikaisz.com.cn.

News center

Tel

+86 13827489472
  • Tel

    +86 13827489472

  • E-mail

    sales@fulikaisz.com.cn

  • Add

    5th Floor, Building B, Yuanfen Industrial Zone, Dalang Street, Longhua District, Shenzhen, China

Copyright © Shenzhen Fulikai Packaging Products Co., Ltd. Main business: Puzzle mat, EVA nail file, EVA educational toy, EVA slippers, EVA foam.
Blog